General
| Frequency coverage | USA | 0.010000–821.999999MHz*, 851.000000–866.999999MHz, 896.000000–3000.000000MHz (*Guaranteed range: 0.100000–821.999999MHz) |
|---|---|---|
| EXP | 0.010000–3000.000000MHz (*Guaranteed range: 0.100000–3000.000000MHz) |
|
| Antenna connector | ANT 1 (0.01–3000MHz) | Type-N (50Ω) |
| ANT 2 (0.01–30MHz) | PL-259 (50Ω) | |
| ANT 3 (0.01–30MHz) | RCA (500Ω) | |
| Frequency stability | Less than ±0.5ppm (at 25°C after warm up) |
|
| Mode | USB, LSB, CW, FSK, AM, FM, WFM, Digital (D-STAR, P25 Phase 1, NXDN, dPMR, DCR) |
|
| Number of channels | 2000 regular with 100 groups, 200 auto memory write, 100 skip and 100 scan edge channels |
|
| Scan types | Programmed, memory, selected memory, selected mode, auto memory write, priority scan and ⊿f scan |
|
| Power supply requirement | 13.8V DC ±15% | |
| DC current drain | Stand-by | 1.8A |
| Maximum audio | 2.0A | |
| Operating temperature range | −10°C to +60°C; 14°F to 140°F |
|
| Frequency resolution | 1Hz | |
| Dimensions (W × H × D) (projections not included) |
220 × 90 × 230mm; 8.7 × 3.5 × 9.1in |
|
| Weight (approximately) | 4.3kg; 9.5lb | |
Receiver
| Receiver system | 0.010–29.999MHz | Direct sampling |
|---|---|---|
| 30.000–499.999MHz | Double superheterodyne (IF: 778.7MHz, 46.35MHz) |
|
| 500.000–1099.999MHz | Double superheterodyne (IF: 278.7MHz, 46.35MHz) |
|
| 1100.000–1499.999MHz | Triple superheterodyne (IF: 900–500.000001MHz, 278.7MHz, 46.35MHz) |
|
| 1500.000–3000.000MHz | Triple superheterodyne (IF: 1000–500MHz, 278.7MHz, 46.35MHz) |
|
| Sensitivity*1 (Preamp ON) | SSB/CW/FSK (at 10dB S/N) | 0.1–1.799MHz −6dBμ 1.8–29.999MHz −14dBμ 30–1099.999MHz −10dBμ 1100–1999.999MHz −10dBμ 2000–3000MHz −8dBμ |
| AM (at 10dB S/N) | 0.1–1.799MHz 16dBμ 1.8–29.999MHz 8dBμ 30–1099.999MHz 15dBμ 1100–1999.999MHz 15dBμ 2000–3000MHz 15dBμ |
|
| FM (at 12dB SINAD) | 28–1099.999MHz −6dBμ 1100–1999.999MHz −6dBμ 2000–3000MHz −4dBμ |
|
| WFM (at 12dB SINAD) | 30–1099.999MHz 3dBμ 1100–1999.999MHz 3dBμ 2000–3000MHz 5dBμ |
|
| D-STAR, NXDN, dPMR (1% BER) | 28–1099.999MHz −2dBμ 1100–1999.999MHz −2dBμ 2000–3000MHz 0dBμ |
|
| P25 (5% BER) | 28–1099.999MHz −5dBμ 1100–1999.999MHz −5dBμ 2000–3000MHz −3dBμ |
|
| Selectivity | LSB/USB/FSK (BW: 2.4KHz) | More than 2.4kHz/−3dB Less than 3.6kHz/−60dB |
| CW (BW: 500Hz) | More than 500Hz/−3dB Less than 700Hz/−60dB |
|
| AM (BW: 6kHz) | More than 6.0kHz/−3dB Less than 15.0kHz/−60dB |
|
| FM (BW: 15kHz) | More than 12.0kHz/−6dB Less than 25.0kHz/−60dB |
|
| WFM | More than 180kHz/−6dB | |
| Spurious and image rejection (Analog mode operation) |
0.010–29.999MHz | More than 70dB |
| 30.000–1099.999MHz | More than 50dB | |
| 1100.000–2499.999MHz | More than 40dB*2 | |
| 2500.000–3000.000MHz | More than 40dB*2 | |
| Audio output power | More than 2.0W (8Ω load, 10% distortion) |
|
1 BW: WFM=180kHz, FM=15kHz, AM=6kHz, SSB/FSK=2.4kHz, CW=0.5kHz
2 More than 35 dB for 1st lF through above 1100MHz. More than 30 dB for 1st lF image above 2000MHz.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Vibration | 514.6 | I |
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
All stated specifications are subject to change without notice or obligation.
Reviews
There are no reviews yet.