AR8600MK2

$1,500.00

+ Free Shipping

General Specifications

  • 1000 channels – 20 banks (dynamic)
  • 530kHz-2040MHz range (MkII- 100kHz-3000MHz)
  • WFM, NFM, SFM, WAM, AM, NAM, USB, LSB, CW, DATA, Auto
  • Scan rate 37cps (max)
  • 50Hz-999.95 steps (in 50Hz steps)
  • 2 VFO’s
  • 12-character alph-tag
  • Bandscope
  • 40 search banks
  • 1 priority channel
  • Frequency offset
  • Noise limiter
  • Attenuator
  • AFC
  • CTCSS (optional)
  • Signal meter
  • Autostore
  • MW bar antenna
  • Computer control
  • Optional (8-AA) Ni-Cad battery pack

 

Category:

AR8600MK2

The AOR AR8600 Mark IIB is an extremely versatile receiver which can be used virtually anywhere,  mobile, base or transportable… powered from an external 12 VDC power supply, optional d.c. lead from a 12 VDC vehicle or from an optional internal battery pack. Like the original AR8600, it features a strong twin metal case with diecast front panel characterizes the multi-purpose role. All mode receive capability is provided including Single Side Band with programmable tuning steps down to a resolution of 50 Hz with the frequency established by a highly accurate Temperature Compensated Crystal Oscillator (TCXO). An RS-232 port further extends the capabilities with free supporting control software available from the AOR web sites.

Center stage is a custom multi-section back-lit LCD, numeric keypad, navigation keys, rotary tuning control and separate controls for volume and squelch control, the LCD can also display alpha-numeric text comments.  A wide frequency coverage is available from 530 kHz to 3000 MHz (less cellular) with actual minimum acceptable frequency of 100 kHz. All mode receive: W-FM, N-FM, S-FM (Super Narrow FM), W-AM, AM, N-AM (Wide, standard, Narrow AM), USB, LSB & CW. A 3.0 kHz SSB filter is employed with true carrier re-insertion resulting in non-offset frequency readout for easy tuning of SSB transmissions. An attenuator and noise limiter are also featured. A supplied AM BCB antenna may be plugged into the rear panel. This radio has an adjustable sleep timer with a range of 1 to 120 minutes (in 1 second increments).

Computer control is available via a standard 9-pin RS232 D-type connector on the rear chassis, just a standard RS232 cable is required for connection to a PC, the extensive RS232 command set is printed in the operating manual along with many pages of explanatory notes. A free software package will be available as a download from the AOR web sites, this provides frequency control & management, searching, scanning, logging with support for geographic data from a GPS and audio recording to disk. The slot cards are common to the AR8600, AR8200 and AR8200Mark2.

Improvements over the original AR8600 include:
Expanded frequency coverage, dimmer on/off function, improved RF front end, better audio response and ability to accept the new TV-8600 video unit.

 General characteristics

HAM bands
?
Frequency stability
?
Tuning steps
0.05 kHz
Memories
1000 channels in 20 bank(s) @ 37 channels/second

 Receiver

RX-range
0.53-3000 MHz (0.1-0.53 MHz with reduced sensitivity)
Modulations
All mode 
Sensitivity
530 kHz – 1.9 MHz
AM: 3.5 µV (10dB S/N)
1.9 MHz – 30 MHz
AM: 2.0 µV (10dB S/N)
30 MHz – 470 MHz
AM: 1.0 µV (10dB S/N)
N-FM: 0.35 µV (12dB SINAD)
W-FM: 1.0 µV (12dB SINAD)
470 MHz – 820 MHz
N-FM: 0.5 µV (12dB SINAD)
820 MHz – 3000 MHz
N-FM: 2.5 µV (12dB SINAD)
Selectivity
SSB/N-AM: 3 kHz (-6 dB), 9 kHz (-60dB)
AM/S-FM: 9 kHz (-6 dB), 20 kHz (-40dB)
W-AM/N-FM: 12 kHz (-6 dB), 25 kHz (-40dB)
W-FM: 150 kHz (-3 dB), 380 kHz (-20dB)
Filters
?
Receiver system
Triple conversion superheterodyne
IF-frequencies
1st: 754.850 or 243.850 MHz
2nd: 45.05 MHz
3rd: 455 kHz
Image rejection
?
Audio output
800 mW (8 Ohms) max @ 10% THD

Reviews

There are no reviews yet.

Be the first to review “AR8600MK2”

Your email address will not be published. Required fields are marked *

Shopping Cart