Hytera PD562i DMR UHF

Additional Features

• Sleek design – Injection molding (dual color) with dimensions of 4.53” X 2.13: X 1.18” coming in just under 10 ounces of total weight
• Durable Standards – Earned an IP54 (5: General protection against dust; 4: Protected against the effect of light rain or minor water splashes) performance rating and also complies with MIL-STD-810 C/D/E/F/G standards
• Analog Compatibility – Can work using multiple, advanced analog mode signals, including HDC1200, 2-tone, and 5-tone, which allows integration into teams using other analog handheld devices
• DMR Certified – Data protocol on the PD562i is fully compliant with DMRA standards
• One Touch Programmable – Fully supports One Touch features, like pre-programmed Text or Voice Call
• True 2-Slot – Merge two different talk paths to operate on the same frequency when using direct mode
• Virtual Trunking – Communicate with everyone on your team in urgent situations
• Upgradable Commands – Activate radio enable, radio disable, priority interrupt, and remote monitor functions with an optional license upgrade.
  

  Frequency range	VHF: 136 – 174 MHz UHF: 400 – 470 MHz
  Channel capacity	512
  Number of zones	32
  Channel spacing	12.5/20/25 kHz
  Operating voltage	7.4 V
  Battery	1500 mAh Li-Ion
  Battery service life(5-5-90 duty cycle)	approx. 11 hours (analog) approx. 16 hours (digital)
  Frequency stability	±0.5 ppm
  Antenna impedance	50 Ω
  Dimensions (H×W×D)	4.53 x 2.13 x 1.06 inches
  Weight	9.17oz
  Transmitter
  RF Power Output	VHF: 1 / 5 W UHF: 1 / 4 W
  FM Modulation (Analog Emissions Designator)	11 KΦF3E at 12.5 kHz 14 KΦF3E at 20 kHz 16 KΦF3E at 25 kHz
  4FSK Digital Modulation (Digital Emissions Designator)	12.5 kHz (data only): 7K6ΦFXD 12.5 kHz (data and voice): 7K6ΦFXW
  Conducted/Radiated Emission	-36 dBm < 1 GHz -30 dBm > 1 GHz
  Modulation limiting	±2.5 kHz at 12.5 kHz ±4.0 kHz at 20 kHz ±5.0 kHz at 25 kHz
  FM Hum & Noise	40 dB at 12.5 kHz 43 dB at 20 kHz 45 dB at 25 kHz
  Adjacent channel selectivity	60 dB at 12.5 kHz 70 dB at 20/25 kHz
  Audio Response	+1 dB to -3 dB
  Audio Distortion	≤ 3%
  Digital vocoder type	AMBE++ or SELP
  Digital Protocol	ETSI-TS102 361-1, 2&3
  Receiver
  Sensitivity (analog)	0.22 μV (12 dB SINAD) 0.22 μV (typical) (12 dB SINAD) 0.4 μV (20 dB SINAD)
  Sensitivity (digital)	0.22 μV / BER 5%
  Adjacent channel selectivity TIA-603 ETSI	60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
  Intermodulation TIA-603 ETSI	70 dB at 12.5/20/25 kHz 70 dB at 12.5/20/25 kHz
  Spurious response rejection TIA-603 ETSI	70 dB at 12.5/20/25 kHz 70 dB at 12.5/20/25 kHz
  Hum and noise	40 dB at 12.5 kHz 43 dB at 20 kHz 45 dB at 25 kHz
  Nominal audio power output	0.5 W
  Nominal audio distortion	≤ 3 %
  Audio sensitivity	+1 dB to -3 dB
  Conducted spurious emission	< -57 dBm
  Environmental Specs
  Operating temperature range	-30 °C to +60 °C
  Storage temperature range	-40 °C to +85 °C
  ESD	IEC 61000-4-2 (level 4) ±8 kV (contact discharge) ±15 kV (air discharge)
  Protection against dust and moisture	IP54
  Shock and vibration resistance	MIL-STD-810 C/D/E/F/G
  Relative humidity	MIL-STD-810 C/D/E/F/G